Home > ELECTRICAL > LIGHTING & CEILING FANS > LIGHT FIXTURES > LIGHTING - RECESSED
Sort By:
1 2 3 4
Powerzone 30000-3L Recessed Light Bar Hanger Powerzone TM2 Open Baffle Trim Powerzone TM3 Open Baffle Trim
Two piece hanger bar for 24" maximum joist spacing. Made of steel with a galvanized finish. Diameter of 7", white trim with baffle for use with 6" Non-IC/IC housings. Easy to install. Takes 1 medium base bulb, (not included). cULus Listed. Diameter of 7", white trim with baffle for use with 6" Non-IC/IC housings. Easy to install. Takes 1 medium base bulb, (not included). cULus Listed.
Powerzone TM9 Open Recessed Light Trim Powerzone TM12 Open Recessed Light Trim Powerzone TM5 Open Recessed Light Fixture Trim
Easy to install. Takes one medium base bulb, (not included). 8" diameter open trim for use with 6" Non-IC housings. Easy to install. Takes one medium base bulb, (not included). 8" diameter open trim for use with 6" Non-IC housings. Diameter of 7", white trim with baffle for use with 6" Non-IC/IC housings. Easy to install. Takes 1 medium base bulb, (not included). cULus Listed.
Powerzone TM6 Open Baffle Trim BAFFLE W/2 WH/TRIM BLK MTL 6IN BAFFLE W/2 WH/TRIM WHT MTL 6IN
Diameter of 7", white trim with baffle for use with 6" Non-IC/IC housings. Easy to install. Takes 1 medium base bulb, (not included). cULus Listed. Halo E-series tapered metal baffle w/white trim, 2 included, wide and narrow. For use with E7RICAT and E7ICAT as well as Halo H7 series. UL Listed. Halo E-series tapered metal baffle w/white trim, 2 included, wide and narrow. For use with E7RICAT and E7ICAT as well as Halo H7 series. UL Listed.
Halo 301P Open Recessed Light Trim Halo 401P Open Recessed Light Trim Halo 300P Open Recessed Light Trim
Open recessed  trim ring, 7-1/4" OD, for use with 6" housings: Halo model numbers (Orgill SKU numbers): H7T (284.2474), H7RT (942.0381) and SHALLOW H27T (989.1672). Sleeved. Open recessed  trim ring, 7-1/4" OD, for use with 6" housings: Halo model numbers (Orgill SKU numbers), H7T (540.1815), and SHALLOW H27T (989.1672). H7RT (942.0381). Sleeved. Open recessed  trim ring, 7-1/4" OD, 3-7/8" ID, for use with 6" housings: Halo model numbers (Orgill SKU numbers), H7ICT (552 4277), H71CAT (854 3951), H7RIC (025 9697). Sleeved.
FIXT RCSD CEIL WH SF RING     Halo H7ICT Recessed Housing Halo 5000P Open Splay Trim
For use with 120 volt Incandescent lamps. Aluminum construction for greater heat dissipation. For installations where housing will be in direct contact with ceiling insulation. Integral thermal protector guards against misuse of insulation materials and improper lamping. Adjustable socket bracket assures proper and consistent lamp positing. Junction box is listed for through branch circuit wiring and has seven 1/2" knockouts. Slide-N-Slide connectors allow non-metallic sheathed cable to be installed without removing knockouts. Pre-installed captive bar hangers allow housing to be positioned at any point within a 24" joist span. Can be field shortened for 12" joist.  Installation: 7-1/2" height allows use in 2 x 8 joist construction. Housing accommodates ceilings up to 2" thick. Requires 6-1/2" ceiling opening. Listings: UL Damp Locations. UL Feed Through. UL Listed for direct contact with insulation. CSA Certified. IP Rated. Diameter of 6-1/2", white trim for use with 5" incandescent rounds. Non-insulated or insulated housings. 75 watt maximum. Bulb sold separately. For use with 5" housings: Halo model numbers (Orgill SKU numbers), H5T (424.1535), H5ICAT (651.3956) and H5RT (635.6182).
Powerzone TRIM201-BK (MTM2) Baffle Trim Halo H7ICAT Recessed Housing Halo H750ICAT Recessed Housing
For use with 4" recessed lights. E27 socket. Use R20/PAR20 maximum 50 watt bulb (not included). Air-tite fixture sealed and gasketed to prevent airflow between attic and living areas. For installations where housing will be in direct contact with ceiling insulation. Integral thermal protector guards against misuse of insulation materials and improper lamping. Adjustable socket bracket assures proper and consistent lamp positing. Junction box is listed for through branch circuit wiring and has seven 1/2" knockouts. Slide-N-Slide connectors allow non-metallic sheathed cable to be installed without removing knockouts. Pre-installed captive bar hangers allow housing to be positioned at any point within a 24" joist span. Can be field shortened for 12" joist.  Installation: 7-1/2" height allows use in 2 x 8 joist construction. Housing accommodates ceilings up to 1" thick. Requires 6-1/2" ceiling opening. Listings: UL Damp Locations. UL Feed Through. UL Listed for direct contact with insulation. CSA Certified. IP Rated. For use with Halo H7 LED 600 Series and 900 Series LED modules. Rated for direct contact with air-permeable insulation in insulated ceilings, may also be used in non insulated ceilings. Air-tite fixture sealed and gasketed to prevent airflow between unconditioned areas and living areas. Rated for 15 watts maximum. 10-1/2" length x 7-1/2" width x 7-1/2" height with 1/2" plaster lip. Ceiling cutout: 6-1/2".
Halo 70PS Recessed Light Shower Trim Coilex Halo 310P Baffle Trim Halo H750RICAT Remodel Recessed Housing
Wet location and AIR-TITE listed white trim with frosted Albalite Lens. 8" OD, for use with 6" housings: Halo model numbers (Orgill SKU numbers): H7T (284.2474), H7RT (942.0381), and SHALLOW H27T (989.1672). Sleeved. Trim ring with phenolic baffle, 7-1/4" OD, for use with 6" housings: Halo model numbers (Orgill SKU numbers), H7T (540.1815), H71CT (552.4277), H71CAT (854.3951), H7RT (942.0381), H7RIC (025.9697) and SHALLOW H27T (989.1672). Sleeved. For use with Halo H7 Collection 600 900 Series LED modules, designed for remodel into insulated ceilings and can be in direct contact with ceiling insulation. AIR-TITE housing design prevents airflow between attic and living areas. Single wall aluminum housing. Installs from below the ceiling in 1/2" or 5/8" ceiling material (may also be used in non insulated ceilings). Quick Connect wiring connectors included in junction box. Rated for 15 watts maximum. 13-1/4" length x 6-7/8" width x 7-1/2" height. Ceiling cutout: Match template supplied with housing - 6-1/4" typical.
TRIM FIXT FULL BFFL WH/BLK 6IN Halo H5ICAT Recessed Housing Powerzone TRIM201-WH (MTM1) Baffle Trim
For installations where housing will be in direct contact with ceiling insulation. Air-tite fixture sealed and gasketed to prevent airflow between attic and living areas. Integral thermal protector guards against misuse of insulation materials and improper lamping. Junction box is listed for through branch circuit wiring and has seven 1/2" knockouts and four Romex knockouts with integral strain relief. Pre-installed captive bar hangers allow housing to be positioned at any point within a 24" joist span. Can be field shortened for 12" joist. Installation: 7-1/2" height allows use in 2 x 8 joist construction.  Housing accommodates ceilings up to 1-3/8" thick. Requires 5-3/4" ceiling opening. Listings: UL Damp Locations. UL Feed Through. UL Listed for direct contact with insulation. CSA Certified. IP Rated. For use with 4" recessed lights. E27 socket. Use R20/PAR20 maximum 50 watt bulb (not included).
Powerzone TRIM205-BN (MTM5) Eyeball Recessed Light Trim Coilex Halo 310W Baffle Trim Powerzone TRIM205-WH (MTM4 Eyeball Recessed Light Trim
For 4" recess light. E27 socket. Use R20/PAR20, maximum 50 watt bulb, ( not included). Trim ring with phenolic baffle, 7-1/4" OD, for use with 6" housings: Halo model numbers (Orgill SKU numbers), H7T (540.1815), H71CT (552.4277), H71CAT (854.3951), H7RT (942.0381), H7RIC (025.9697) and SHALLOW H27T (989.1672). Sleeved. For 4" recess light. E27 socket. Use R20/PAR20, maximum 50 watt bulb, ( not included).
Coilex Halo 410W Baffle Trim FIXTURE LT EYEBALL MTL WHT 6IN Powerzone TM4 Open Baffle Trim
White trim ring with phenolic baffle, 7-1/4" OD, for use with 6" housings: Halo model numbers (Orgill SKU numbers), H7T (540.1815) and H7RT (942.0381). Halo E-series 6" white trim with white eyeball. 35 degree tilt. Uses PAR30 lamp. UL Listed. For use with E7RICAT and E7ICAT as well as Halo H7 series. Diameter of 7-1/4", white trim with reflector for use with 6" Non-IC/IC housings. Easy to install. Takes 1 medium base bulb, R-30, 75 watt maximum, (not included).
   
 
1 2 3 4