Home > PAINT & SUNDRIES > SUNDRIES > HOUSEHOLD GLUES > EPOXY ADHESIVES
Sort By:
1 2
Henkel Quick Set Epoxy Resin ITW Permatex 84107 Permapoxy Epoxy Devcon S-5 VersaChem Plastic Steel Epoxy
Two-part adhesive consisting of an epoxy resin and a hardener. Bonds in 5 minutes. Dual syringe delivers equal parts. For a wide range of materials or a s a versatile filler for gap filling, surface repairs and laminating. Can be sanded and drilled. 3,200 psi. Versatile, easy-to-use, multi-purpose epoxy adhesive for metals, fabric, fiberglass, glass, rubber, concrete and most plastics. When cured, can be drilled, sanded, threaded or filed. Resistant to fuels and solvents. Resists most liquids. Great for automotive applications. Convenient 2-part dispensing syringe. Fills gaps and bonds trim. Use on casting cracks and holes, auto trim and ornaments. Sets in 30 minutes. Permanent strength up to 3,500 psi. Clear. Fast curing and high strength epoxy. When fully cured, can be drilled, threaded, tapped or filled. Contains a steel alloy that does not rust.  Use it on all metals including steel, stainless steel, aluminum, brass, iron and pewter. Non-flammable.
3M 18094 Quick Set Epoxy ITW Permatex 84101 Permapoxy Epoxy 5 Minute S205 Fast-Curing Thixotropic Epoxy Adhesive
Use to repair metal, china, glass and plastics. Sets up in 5 minutes. Dries clear. Multi-purpose epoxy adhesive for metals, fabric, fiberglass, glass, rubber, concrete and most plastics. When cured, can be drilled, sanded, threaded or filed. Resistant to fuels and solvents. Resists most liquids. Great for automotive applications. Convenient 2-part dispensing syringe. Fills gaps and bonds trim. Use on casting cracks and holes, auto trim and ornaments. 3,400 psi. 5 minute set time. Rapid-curing, general purpose epoxy. Starts setting in 5 minutes. Works on metal, wood, chrome, tile, glass, fiberglass, concrete, ceramic, china and more. Sandable and paintable. 1,500 psi bond strength.
Loctite 1360788 Epoxy Plastic Bonder Plastic Steel S-6 2-Part Metal Repair Epoxy Protective Coating PC-11 Marine? Epoxy
Formulated to bond and repair plastic surfaces. Double syringe dispenses equal amounts of each component. Components react to produce a tough, rigid, high strength bond in 20 to 25 min. Does not shrink and is resistant to water, most common solvents and shop fluids. High impact resistance. Can be sanded and drilled. Fast curing and high strength epoxy.  When fully cured, can be drilled, threaded, tapped or filled.  Easy flow syringe with a Snap-On cap that allows for storage and reuse. Use it on all metals including steel, stainless steel, aluminum, brass, copper, iron and pewter. Fills gaps and hardens to a metallic mass. Non-flammable. Use to make wet surface and underwater repairs. Boat, water and stock tanks, spas,  tubs, plumbing and porcelain. Cures: wet, dry and underwater.
ITW 5 Minute Flow-Mix Automix Epoxy PC-Clear 70147 Fast Curing Medium Viscosity Epoxy Adhesive PC-Fast-N EZ 61411 2-Part Epoxy Adhesive
Rapid-curing, general purpose epoxy. Starts setting in 5 minutes. Flow-Mix nozzle allows for self-mixing and no mess. Works on metal, wood, concrete, chrome, fiberglass, tiles, ceramic, glass, china and more. Bond strength 1,500 psi. Starts setting in 5 minutes. Medium viscosity liquid epoxy system with greater clarity than other epoxies. Can be used for repairs and projects. Fast curing, but allows ample time to apply and position the repair, 4 minute work time and total cure is 1 hour. Not brittle when cured, forms a tough and resilient bond. 2,300 psi tensile shear strength. Use as a general purpose adhesive to bond wood, metal, fiberglass, ceramics, glass and many hard plastics. Forms a water-resistant bond and is tough enough to be drilled, tapped, filled or sanded after final cure. Low-odor. 2-component. Cures rapidly at room temperature with exceptional tensile adhesion and peel strength to a wide variety of substrates. Forms a tough bond without the need for clamping. Flexible. 1,700 psi tensile shear strength.
Loctite Instant Mix Epoxy Resin J-B Weld 8265S Jb Weld Cold Weld Compound PC Fahrenheit 25543 2-Part Hand Moldable Epoxy Adhesive
Can be as an adhesive for a wide range of materials or as a filler for gap bonding, surface repairs and laminating. Does not shrink. Resistant to water and most common solvents. Can be tinted with earth pigments, cement or sand. Can be sanded and drilled. 3200 psi bond. 5 min setting time. Reaches handling strength in a hour. Bonds, fills and repairs aluminum, brass, bronze, ceramic, copper, iron, pewter, plastic, porcelain, steel and wood. For automotive, industrial, households, hobbies, farm machinery and equipment. Drying time 4 to 6 hours before handling. Not affected by gas, oil or water. One tube contains a mixture of fine steel in a liquid base. The second tube contains hardening compound. Designed to bond surfaces exposed to high heat. For quick emergency-type repairs like mufflers, engine blacks, grills, stoves, steam pipes and more. Cut, mix and apply. Allows a working time of about 8 minutes and cures for service in 60 minutes. Designed for elevated temperatures up to 500-degrees fahrenheit. Apply to clean and dry surfaces. Waterproof. Fast-setting. No sag. No Drip. Hand moldable. Can be sanded, drilled, sawed, and painted after thirty minutes.
Devcon 44029 Epoxy Putty 5 Minute S210 Fast-Curing Thixotropic Epoxy Adhesive J-B Weld 8277 Epoxy Adhesive
Permanently repairs leaks, holes, cracks in metal, fiberglass, concrete and more. When fully cured, it can be drilled, filed, sanded and painted. Works on metals, copper, brass, steel, aluminum, iron, concrete and wood. Chemical resistant. Rapid-curing general purpose. Will not drip or sag. For vertical or overhead applications. Use on metal, wood, chrome, concrete, glass, ceramics, fiberglass, china, tiles and more. Sandable and paintable. Fills gaps. Bonding strength 2,500 psi. Use Waterweld as an adhesive, laminate, plug, filler, sealant, electrical insulator, and to patch holes and cracks. It can be formed, drilled, ground, sawn, tapped, machined, filled, sanded, painted and applied under water. Stays pliable for about 2 minutes after mixing, sets in just 20 minutes, and cures fully in just a few hours. Waterproof and withstands temperatures up to 300 degrees Fahrenheit. Approved by the national sanitation foundation.
J-B Weld 8276 Jb Kwik Weld Cold Weld Compound PC-Crete 25581 Hand Moldable Epoxy Putty PC-Lumber 25574 Moldable Epoxy Putty
Use as an adhesive, laminate, plug, filler, sealant, and electrical insulator. Can be formed, drilled, ground, tapped, machined, filled, sanded, and painted. Use equal portions from the black and orange tubes. Mix thoroughly. Pliable for about 2 minutes after mixing. Sets in 4 minutes and cures fully in 4 hours. Water-proof, petroleum-, chemical-, and acid-resistant. Resists shock, vibration and extreme temperature fluctuations and withstands temperatures up to 300 degrees-Fahrenheit. Non-toxic. Bonds to virtually any combination of iron, steel, copper, aluminum, brass, bronze, pewter, porcelain, ceramic, marble, glass, PVC & ABS, concrete, fiberglass, wood, fabric, paper just about any porous and non-porous material. Can be clean up with soap and water before it sets. For emergency repairs to masonry and concrete surfaces including concrete steps, brick, mortar, stucco, curbs, pipes; conduit holes, nail and screw damage to walls and floors; and for stripped anchor bolts. Also for places where concrete has been broken or missing such as lawn ornaments or statues. Hand mixed, 2 to 3 minute working time. Cures in 30 to 60 minutes. Looks and feels like concrete. Nonconductive with -20 to 300 degrees Fahrenheit temperature range when cured. No sag, no drip. Resistant to hydrocarbons, ketones, alcohols, esters, aqueous salt solutions, halocarbons, and dilute acids and bases. 650 psi tensil shear strength. 75-85 hardness shore D after 1 week of curing. Packed in resealable, airtight plastic cylinder. For emergency repairs in wood; fill nail and screw holes, gouges; and replace rotted and worn wood. Replace and reshape wood parts, restore ornate wood pieces and carvings; repair damaged furniture, moldings, doors, frames, and wood floors. Hand mixed with 15 minute working time. Cures in 60 minutes. May be sanded, stained or painted. Wood color blends with light colored wood. Nonconductive with -20 to 300 degrees Fahrenheit (-29 to 150 degrees Celsius) temperature range when cured. No sag, no drip. Resistant to hydrocarbons, ketones, alcohols, esters, aqueous salt solutions, halocarbons, and dilute acids and bases. 500 psi tensil/shear strength. Packed in resealable, airtight plastic cylinder.
PC-Marine 25567 Hand Moldable Epoxy Putty Loctite Mastermind Epoxy Metal/Concrete Resin J-b Weld PlasticWeld Quick Setting Epoxy Adhesive
For emergency repairs in salt or fresh water, for improved resistance to moisture. Suited for repairs to boats, water and stock tanks, fish boxes, spas and tubs, downspouts and gutters. Cures wet, dry or in water in pools, fiberglass and bath fixtures. Hand mixed with 15-20 minute working time. Cures in 60 minutes. May be shaped, drilled, sanded, sawed, filed and painted. Nonconductive with -20 to 300 degrees Fahrenheit (-29 to 150 degrees Celsius) temperature range when cured. No sag, no drip. Resistant to hydrocarbons, ketones, alcohols, esters, aqueous salt solutions, halocarbons, and dilute acids and bases. 700 psi tensil shear strength. 75 hardness shore D after 1 week of curing. Packed in resealable, air-tight plastic cylinder. For repairing, filling and rebuilding all metals and concrete surfaces. High strength bond in 5 to 12 minutes. Does not shrink is resistant to water and most common solvents. Cured epoxies can be drilled, tapped, threaded or filed. Bonds a variety of surfaces which include ABS & PVC plastics, fiberglass, metals and more. Sets in 5 min and cures in 1 hour. 3200 PSI. Dries off white.
PC-Super 16619 Epoxy Putty J-b Weld PlasticWeld KwikPlastic Epoxy Putty SYRINGE WELD STEEL 25ML
Use for bonding, sealing and as a filler for most materials including fiberglass, wood, concrete, metal, brick, glass, block, ceramics, hard plastics and more. Can be applied to both vertical and overhead surfaces without drip or sag. 15 minutes max working time at 70 degrees Fahrenheit. 45 minutes tack free, 3 to 4 hours for service, 3 to 7 days for max cure. Chemical resistance to most chemicals, salt water, gasoline and fuel oil. Non-conductive, -20 to 200 degrees Fahrenheit temperature range, 2,650 psi tensile shear strength. 78 hardness shore D after 1 week of curing. Repairs and rebuilds anything made of ABS, PVC and CPVC. Bonds instantly. Does not shrink or pull away. Sets in 20-25 minutes. Can be sanded, drilled, painted or sawed in 2-3 hours. Two-part, high strength, cold welding adhesive and filler system that eliminates the need for welding or brazing. Can be used to bond many types of metals. Sets in four minutes, no clamping needed. Dark grey appearance. Fills gaps and will not shrink. When cured, can be drilled, sanded, threaded or filed. Resistant to water and solvents. Temperature range -60-degree F to 300-degree F. Permanent strength up to 4500 PSI.
J-B Weld 8267S J-B Steelstik Adhesive/Sealant PC-Metal 25550 Hand Moldable Epoxy Putty Loctite Mastermind Epoxy Putty
Hand kneadable, steel-reinforced epoxy putty. Plug holes and make permanent repairs on wet and dry surfaces. Can be drilled, sanded, filed, tapped, machined, and painted. Use as an adhesive, laminate, plug, filler, sealant, and electrical insulator. Cures in 20 - 30 minutes. For emergency automotive and plumbing repairs of gas tanks, radiators, holes or dents. Use on drums, steel doors, tanks, pipes, wherever metal is missing, dented or broken. Hand mixed with 3 minute working time. Cures in 30-60 minutes. May be sanded, drilled, sawed and painted after set. Nonconductive with -20 to 300 degrees Fahrenheit (-29 to 150 degrees Celsius) temperature range when cured. No sag, no drip. Resistant to hydrocarbons, ketones, alcohols, esters, aqueous salt solutions, halocarbons, and dilute acids and bases. 900 psi tensile shear strength. 75-85 hardness shore D after 1 week of curing. Packed in resealable, air-tight plastic cylinder. Suitable for use on plumbing, tubs & showers, pipes, potable water tanks, fiberglass, marine & pool, ceramic, PVC, aluminum, wood, brick, metal, concrete, rigid and semi-flexible plastic. It bonds metal, wood, ceramic, brick, most plastics and concrete. Can be sanded, drilled, tapped and painted. Produces a hard, tough, permanent and waterproof bond on a wide range of materials.
   
 
1 2